Slide a scale onto your forks in seconds.
Remove it when weighing is not needed.
Carriage scales reduce lifting capacity and shift the load center. Weighing forks can also limit how the forklift is used, since loads cannot be safely lifted from the fork tips.
With traditional systems, the scale is permanently installed on a single forklift. If you want weighing across the fleet, each forklift requires its own system.
Integrated weighing systems add components to the forklift that are exposed to daily wear. This increases maintenance needs and can lead to additional downtime.
Slide the sleeves onto the forklift forks just like standard fork extensions. No tools, no hydraulic connection, and no permanent installation required.
Secure the sleeve in place using the built-in safety pin. The system is ready for operation in seconds.
Lift the pallet and read the weight instantly on the wireless indicator. Accurate, simple and ready whenever weighing is needed.
| Max capacity: | 2,500Kg / 5,000Lbs |
| Readout: | 1Kg / 2Lbs |
| Accuracy: | 0.1% of applied weight |
| Forklift fork height: | up to 45mm / 1.75″ |
| Forklift’s fork width: | up to 120mm/ 4.5″ |
| Forklift’s fork length: | up to 1,200mm / 47″ |
| Battery life (sleeves): | 100 weighing / 2,500 stand by hours |
| Charging port sleeves: | Standard USB-C. (can be charged with a standard phone charger or a power bank). |
| Power source indicator: | standard 5V USB-C. Optional 12-24VDC port. |
| Sleeves to indicator commuicaitons : | BLE (Bluetooth Low Energy) |
| Communication options: | Serial RS232, Wi-Fi (supports certificates and WPA3), BLE. |